GLASS | Ceramic Coating
Couldn't load pickup availability
Ships fast from Waterloo, Ontario
Free shipping on orders over $75. Every order ships domestic, in CAD, with a full how-to on every product page. Stuck on anything? Email us and a working detailer answers.
GLASS creates a perfectly clear shield on top of your windshield and windows that renders them completely hydrophobic. Specially formulated to create a chemical bond with glass, this ceramic coating is an essential addition to any car.
Why Do Canadians Need It?
It's well know that Canadians spend more on wipers and washer fluid than anyone else. Since water and slush slide off when GLASS is applied, you can cut both those expenses in half.
Additionally, hyperCLEAN’s GLASS is rated for temperature resistance above 250 °C, meaning it holds up even under high heat from sun and engine proximity.
How Do I Use It?
-
Wear gloves. Always protect your skin.
-
Load the applicator. Place 10–15 drops of GLASS onto a suede applicator pad.
-
Apply in halves. Work on half of the glass section at a time.
-
Flash / bead. Wait until the product “beads up” or starts to sweat.
-
Level carefully. Use the Leveler Towel for the initial wipe, then follow with a VersaTowel for a final buff and residue pick-up.
The coating
See clearly at highway speed
GLASS is a ceramic coating built specifically for your windshield and windows. Once cured, water beads and rips off the glass at speed, to the point where you will use your wipers a fraction as often.
In a Canadian context that means slush spray on the 401 clears itself, and winter mornings start with less scraping because ice releases from the coated surface more easily.
The difference
Built for glass, not borrowed from paint
Glass is harder and hotter than paint, so GLASS was formulated for it specifically, with chemical resistance and temperature resistance above 250 degrees. It works on every window on the car and plays well with windshield protection film.
Rain repellent wipes wear off in weeks. A proper glass coating keeps performing through seasons of wiper passes and washes.
The application
Half a windshield at a time
Clean the glass properly first, then put on gloves and apply 10 to 15 drops to the pad. Coat half the windshield at a time, wait for the coating to sweat or bead, then level with a towel and give it a final buff.
The whole car takes well under an hour, and the difference shows the first time you drive in rain.
The details that matter
Extreme hydrophobics
Rain beads and clears at speed. Wipers become the backup plan.
All glass surfaces
Windshield, side glass, rear glass, and mirrors. One bottle does the car.
250 degree resistance
Industry leading temperature resistance keeps it stable on hot glass.
Chemical resistance
Washer fluid, road salt, and bug remover do not strip it.
Film friendly
Safe over windshield protection film.
Ships from Waterloo
Stocked in Ontario, priced in CAD, and customs never enters the picture.
How it stacks up
The full routine, in order
Questions people actually ask
How long does it last?
Seasons, not weeks. The windshield works hardest with wiper passes and scraping, so expect to refresh it there first while the side glass keeps going.
Will my wipers damage it?
Normal wiper use is factored in. Keep the blades in decent shape and clear heavy ice by hand before running them and the coating holds up well.
Can I put it on the inside of the glass?
It is designed for exterior use, where the water and grime are. Use Glass Cleaner inside for a streak free finish.
Does it work with winter washer fluid?
Yes. The chemical resistance handles washer fluids, salt spray, and everything else winter driving throws at the windshield.
Is it hard to apply?
It is the easiest surface on the car to coat. Flat glass, small area, and the sweating cue tells you exactly when to level.
Rain you barely notice.
Coat your glass once and spend the wet season actually seeing the road.
Get GLASSWe stand behind every bottle. 30 days, and we make it right.
