LEVEL | Cutting Compound
Couldn't load pickup availability
Ships fast from Waterloo, Ontario
Free shipping on orders over $75. Every order ships domestic, in CAD, with a full how-to on every product page. Stuck on anything? Email us and a working detailer answers.
LEVEL is an aggressive cutting compound specifically engineered to get rid of the most ingrained swirls and scratches while maintaining speed and consistency.
Why Do Canadians Need It?
Canadian paint correction often means dealing with real-world abuse like swirls from salt residue, oxidation from cold climates, and micro-marring from grit buildup.
LEVEL delivers the cutting power to remove those defects quickly, saving hours of work without risking haze or holograms. It’s the go-to compound for prepping daily drivers, coated vehicles, or show cars under tight timelines.
How Do I Use It?
-
Ensure paint is clean, cool, and dry.
-
Shake well before use.
-
Apply 3–4 pea-sized drops to a foam or microfiber cutting pad.
-
Spread evenly over a 2'×2' section at low speed.
-
Increase to medium speed (4–5 on a DA) with moderate pressure.
-
Work in overlapping passes until the defects are removed.
-
Wipe away residue with a clean microfiber towel.
-
Inspect under proper lighting. For maximum gloss, finish with hyperCLEAN Luxe Polish before protection.
The compound
Correction at full speed
LEVEL is a cutting compound built to remove scratches, swirls, and paint defects faster than anything you have used, while leaving behind a finish clean enough to surprise you.
It is the heavy step of paint correction, for the panels where the damage is real and the deadline is today.
The technology
Abrasives that sharpen themselves
LEVEL uses diminishing self sharpening abrasives. As you work the product, the abrasives break down and re sharpen, cutting hard at the start of the pass and refining as they diminish.
The result is defect removal that normally takes two products, with a surface that often needs just a quick pass of LUXE to be coating ready.
The application
By machine or by hand
Work panel by panel with a polisher and a cutting pad, or by hand on spot repairs. Let the abrasives run their cycle through each section pass before you inspect.
Follow with LUXE for maximum clarity, wipe the oils off with Wipe, and the paint is ready to be locked in under a coating.
The details that matter
Fast defect removal
Cuts scratches, swirls, and oxidation with unmatched speed.
Self sharpening abrasives
Diminishing abrasives cut hard, then refine the finish.
Clean finish for a compound
Minimizes the polishing left to do afterward.
Machine or hand
Works with a polisher or on hand spot repairs.
Coating ready path
LEVEL, then LUXE, then Wipe. Correction done properly.
Ships from Waterloo
Stocked in Ontario, priced in CAD, and customs never enters the picture.
How it stacks up
The full routine, in order
Questions people actually ask
Do I need a machine polisher?
For full panels, a machine gets dramatically better results in less time. For a single scratch or scuff, LEVEL works by hand with a foam applicator.
Will it leave haze?
Far less than a traditional compound. The diminishing abrasives refine as they break down, and a quick LUXE pass afterward removes anything left.
When is LEVEL the wrong choice?
On paint with only light swirls. Start with LUXE or VELO there, and save the cutting power for defects that need it.
What pad should I use?
A microfiber or foam cutting pad for defect removal. Drop to a lighter pad to reduce the cut on soft paint.
What comes after LEVEL?
LUXE for final clarity, Wipe to strip the oils, then your coating. Corrected paint deserves to be locked in.
The damage stops here.
Cut the defects out with LEVEL and give yourself paint worth protecting.
Get LEVELWe stand behind every bottle. 30 days, and we make it right.
