VELO | One Step Cut and Finish
Couldn't load pickup availability
Ships fast from Waterloo, Ontario
Free shipping on orders over $75. Every order ships domestic, in CAD, with a full how-to on every product page. Stuck on anything? Email us and a working detailer answers.
VELO is the perfect start point to polishing. Engineered with Diminishing Self-Sharpening Abrasives, it starts as an aggressive defect removal paste and transitions into a high gloss polish, all in one simple pass with a polisher.
Why Do Canadians Need It?
Detailing in Canada means dealing with harsh conditions, like winter grit and salt to summer UV and pollen buildup. Paint often suffers from swirls, oxidation, and surface contamination that demand both cutting and finishing.
Velo eliminates the need for multiple products or steps, helping professionals and enthusiasts correct, refine, and prep paint faster even in cold or humid environments where time and control matter.
How Do I Use It?
-
Ensure the surface is clean, cool, and dry.
-
Shake well before each use.
-
Apply 3–4 pea-sized drops of Velo onto your foam or microfiber cutting/polishing pad.
-
Using a dual-action or rotary polisher, spread evenly over a 2’×2’ section at low speed.
-
Increase to medium speed (typically 4–5 on a DA) with moderate pressure.
-
Work in overlapping passes until defects are removed and a deep gloss appears.
-
Wipe away residue immediately with a clean microfiber towel.
-
Inspect under proper lighting — your paint is now ready for protection.
The polish
Cut and finish in one pass
VELO is a hybrid compound and polish that removes scratches, swirls, and defects while simultaneously refining the surface to a high gloss. One product, one set of passes, one afternoon.
It is the correction answer for people who want dramatically better paint without running a two product process.
The technology
The abrasives do both jobs
VELO runs the same diminishing self sharpening abrasive technology as LEVEL and LUXE. The abrasives start aggressive enough to remove defects, then break down progressively finer, finishing the surface as they go.
What normally takes a compound and a polish happens inside a single working cycle.
The application
One step, honest results
Work panel by panel with a polisher and a medium pad, letting each section pass run long enough for the abrasives to finish their cycle. Inspect, hit anything stubborn again, and move on.
Follow with Wipe and a coating, and a Saturday takes the car from tired to locked in.
The details that matter
True one step
Defect removal and high gloss finishing in a single product.
Self sharpening abrasives
Cut hard early, finish fine late, automatically.
Time saver
Correction results in a fraction of the two step time.
Handles real defects
Swirls, light scratches, and oxidation, not just haze.
Coating ready
Finishes clean enough to prep and coat the same day.
Ships from Waterloo
Stocked in Ontario, priced in CAD, and customs never enters the picture.
How it stacks up
The full routine, in order
Questions people actually ask
VELO or LEVEL plus LUXE?
VELO for most daily drivers, where a one step gets ninety percent of the result in half the time. The two step is for heavy damage or show level finish standards.
Can it handle deep scratches?
It removes swirls, light scratches, and oxidation. A scratch that catches your fingernail is beyond any polish and needs touch up paint.
Do I need a machine?
For full panels, yes, a dual action polisher makes VELO shine. Spot repairs work by hand with more elbow grease.
What pad works best?
A medium foam pad balances the cut and finish. Go softer on soft paint, firmer on hard clear.
What comes after?
Wipe to strip the oils, then a coating. Corrected paint without protection starts collecting swirls again immediately.
Correction without the marathon.
One product, one afternoon, and the swirls that bothered you every sunny day are gone.
Get VELOWe stand behind every bottle. 30 days, and we make it right.
